Are additional materials required for installation?

Yes, you will need the following items:
1. 1/4 inch masking tape
2. Wetting Solution consisting of:

  • 4 oz. Isopropyl alcohol, 70 percent by volume (common rubbing alcohol)
  • 12 oz. Distilled Water
  • 14 drops clear or white ONLY dishwashing liquid, regular strength, or 7 drops concentrated.

We will provide a dropper cap which will fit most US brands of dishwashing liquid.
3. Razor Blade Knife (new blade only)
4. Paper Towels (High quality, oil free, single ply only
5. Rubber hospital-type gloves
6. Non-silicon based automotive paste wax
7. For installation over stripes or on a new or freshly polished lens:

  • 600-1500 grit sandpaper
  • Sanding block
  • Rubbing compound

8. Scissors or Tin Snips

This entry was posted in . Bookmark the permalink.
mlvossler